For Asgard and the Marvel Universe!

[laughing paradox]

Batroc is here: http://forceofparadox.yolasite.com/marvel.php#general

Murs did Crossbones (it's his last skin, I think): http://forceofparadox.yolasite.com/murs47.php

Porcupine can be found here, under Marvel/Misc (that could really use an updated skin): https://groups.yahoo.com/neo/groups/lpdox/

C6 did an updated Boomerang skin here: https://groups.yahoo.com/neo/groups/C6_Unhosted_Skins/info

I know Grenadier meshed Zaran. I don't know about a skin, tho.

[hoss20]

If you need them, the mesh for Batroc is here: https://groups.yahoo.com/neo/groups/Grenadiermeshes5/files

and the mesh for Boomerang is here: https://groups.yahoo.com/neo/groups/Grenadiermeshes9/files

[Cyber Burn]

For Domino, I had Skoped Pod's version onto the "Task_Mistress_Fixed" Mesh by Ink. I never released it publically since it was done for a request, but if you're interested, I'd be glad to send it your way.

As for the others, "Assassin", "Harvester", and "Nakh", seem to be the only ones that I have nothing for.

As for Grizzly, can you post a pic or link, I don't know if what I have is the same one you want.

[BentonGrey]

Thanks guys! Those are all awesome!

CB, sure man, send it my way.  I figured those guys would be pretty obscure.  I'm not sure if anyone has done them, and if not, no worries. I'll figure something else out.

I know nothing about Grizzly, so send me what you've got.

Ohh, does anyone know where I can find that awesome X-Jet that someone did some years back?

• Boomerang
• Bullseye
• Domino
• Zaran
• Grizzly
• Crossbones
• Assassin
• Harvester
• Nakh
• Mysterio
Machete
• Porcupine
• Batroc

[Cyber Burn]

You've got mail. 

[BentonGrey]

Hmm, it looks like Machete has a very nice skope, but he needs a skin.

[spydermann93]

Hmm, it looks like Machete has a very nice skope, but he needs a skin.

Which skope are you looking at?

[Cyber Burn]

https://groups.yahoo.com/neo/groups/lion23dj_skopes/info

Though I've been wanting to make a Skope for him since Grenadier released his "Zaran" Mesh.

[hoss20]

Going with whom you didn't have checked off your list:

Bullseye: https://groups.yahoo.com/neo/groups/Grenadiermeshes15/files (skin by C6)

Zaran: https://groups.yahoo.com/neo/groups/Champions_of_Freedom_2/files/

[BentonGrey]

Ohh man!  That Zaran mesh's animations are tremendous!  Gren really outdid himself with this guy!

Thanks guys!

[detourne_me]

I believe I released a bullseye skope that included some sai animations too, that may be up our alley.

[Deaths Jester]

https://groups.yahoo.com/neo/groups/lion23dj_skopes/info

Though I've been wanting to make a Skope for him since Grenadier released his "Zaran" Mesh.

Grenadier released a Zaran mesh?!?!?!  You mind sending me that Cyber?  I'll PM you my email addy.

[spydermann93]

Ohh, does anyone know where I can find that awesome X-Jet that someone did some years back?

Are you talking about the Blackbird?

Ink has that at Heroforce

[BentonGrey]

Yes, that's it!  Thanks Spyder!

Hey guys, I'm wondering if I've got an issue with Gren's IG_Starbolt.  His flames are coming off of him in very blocky textures.  It looks like a bad conversion from .tga to .dds, but they're still .tga.  Is anyone else seeing this?  Is my copy just corrupted somehow?

[Cyber Burn]

Yes, that's it!  Thanks Spyder!

Hey guys, I'm wondering if I've got an issue with Gren's IG_Starbolt.  His flames are coming off of him in very blocky textures.  It looks like a bad conversion from .tga to .dds, but they're still .tga.  Is anyone else seeing this?  Is my copy just corrupted somehow?

I think its just the way that the FX (.TGA) Files were made. I modified the existing FX (.TGA) Files to shrink the visible aspect down a bit, just to test it out, so now it doesn't have the blocky appearance. Unfortunately, they are now considered "Kittbashed", so I don't think that what I just did can be used. If you want, I can create new Textures for the FX Emitters and send them your way.

[BentonGrey]

Well CB, why don't you send me the one you whipped up so I can get an idea of what this looks like.

[Cyber Burn]

You've got mail. 

[BentonGrey]

Thanks CB! 

On a different note, is there anyone out there who can show me how to edit the Vulnerability attribute to where it removes Physical Resistance as well?

[spydermann93]

What I did to fix the Starbolt texture issue was I just left it as a .tga.  I have yet to see it with that annoying pink hue and the flames look like they should.

[BentonGrey]

The flames look good on yours, Spdyer?  See, that's just it, I HAVEN'T converted it, but they LOOK like they've been converted.  Would you send me yours for comparison?

[spydermann93]

The flames look good on yours, Spdyer?  See, that's just it, I HAVEN'T converted it, but they LOOK like they've been converted.  Would you send me yours for comparison?

Sure thing! I'll be sending them now.

I don't know if you did this, but I left the .tga files as "32-bit" (if they were 32-bit) to begin with.

[BentonGrey]

Thanks Spyder! 

So guys, didn't someone make an X-Mansion map for FF2 in the last several years?  I don't seem to have it, but I remember someone creating it.

[spydermann93]

Here's one that I found: http://www.mediafire.com/download/ovqyerwrzwhh2zd/x-mansion.zip

I found it here: https://www.mediafire.com/frp

[BentonGrey]

Thanks Spyder!  I didn't even know that mediafire page existed, nice.

[BentonGrey]

Hmm, I'm having trouble with this X-Mansion map.  None of the objects are showing up, despite the fact that they all seem to have the correct path (area_speciff1) and all of the meshes are in the mod folder.  Anyone willing to field this one for me?

[spydermann93]

After looking at the .zip file, it seems like there isn't any "area_speciff1" folder, but "area_specific".  Perhaps moving the files to "area_specific" will fix it?

[BentonGrey]

I don't think so.  The objects on the map are all FF1 objects.  The area_specific folder in the .zip is just the location for the terrain and level layout stuff.  That datapaths for the objects are all pointing to the udated area_speciff1 folder, and all of the objects are in the proper places.

[spydermann93]

I don't think so.  The objects on the map are all FF1 objects.  The area_specific folder in the .zip is just the location for the terrain and level layout stuff.  That datapaths for the objects are all pointing to the udated area_speciff1 folder, and all of the objects are in the proper places.

Hmm... I have no idea. I'll have to toy around with it tomorrow, after I'm done with class (Summer college courses are no bueno )

[BentonGrey]

Cool, thanks Spyder!

Just a heads-up for everyone, I'll be out of town for the rest of this week, and I may not have internet access.  I'll catch y'all this weekend!

[BentonGrey]

So, I have a different one for y'all this time.  I need some help, but not with skins, meshes, or skopes.  I'm a little stuck on an X-Men mission, story and mission design-wise, and I could use a sounding board.  What I need is one or two folks who have a great love for and knowledge of classic Marvel and a sense for storytelling and mission design.  You don't have to be a modder, as long as you think you're capable of discussing what makes for an interesting mission to play.  I want to do some quiet conversing about campaign design, and I don't want to make it entirely public, as that ruins some of the surprise.  Do I have any takers?