News:

Rings of Reznor!

Main Menu

Christmas is coming

Started by Randomdays, November 29, 2021, 12:15:16 PM

Previous topic - Next topic

Randomdays

So, not really a request for myself, but I'll have some time coming up during the holidays and I'm willing to take a few requests as presents.

I've already got a few lined up for Cranlox and Dana, but if anyone has a couple of requests(each) they'd like to make, send them over and I'll see what I can do.

Keep in mind that I mainly do imports, but I can do some meshing and moving parts around in Blender, and I can do things like move a mesh from one type to another (IE male_basic to Tommyboy TV, male to female, or onto smaller or swimmer kfs.)

I'll also probably put a copy of the updated list I've been doing up later to day as well, and I'm open to limited requests from that as well.

Merry Christmas!


cranlox

I can think of the characters of Miraculous : lady bug And Catnoir
here are this 2
https://www.models-resource.com/mobile/miraculousladybugcatnoirtheofficialgame/model/30062/
https://www.models-resource.com/mobile/miraculousladybugcatnoirtheofficialgame/model/30063/

and Here I uploaded some classic Disney characters: Beast, Buzz, Rafiki & Gaby
These versions are a bit rare to find and I have them for a while on my other old computer
https://www.mediafire.com/file/ax12iejckwvcdap/READY.rar/file

https://www.models-resource.com/playstation_2/kingdomhearts2/model/1503/

I also made a skin for a hercules inspired by the Disney version but it was years ago before I knew that they made such perfect imports.
It would be good if the mythological titan of Disney's Hercules was attended
https://www.models-resource.com/playstation_2/kingdomhearts2/model/1503/

I think that in some game there is Agent Antivenom, but I have not found it yet although it is quite similar to Agent Venom, that one occurs to me.
https://www.deviantart.com/maxdemon6/art/Agent-Anti-Venom-870664077
It is not exactly the costume that I like about the character since it is itself more of an inverted re-texturing

I know you're working on various things like Ratchet & Clank and fighting Sullivan.
Thanks for that but when it comes to brainstorming, I've always been on generously long lists for santa

If you want to accept some great and equal I understand that I suggested too many.

Randomdays

Cranlox, I'm going to limit you to 3 for the holidays - Sullivan, Ratchet and Clank, unless you'd like one of the others more to replace one of these?

For Ratchet and Clank, these two;

https://www.models-resource.com/playstation_2/ratchetclank/model/6657/

https://www.models-resource.com/playstation_2/ratchetclank/model/6658/

Unless you'd like a different version of these as well.



Dana, I'm going to try to do the 4 elementals - Earth, Fire , Water and Air, Unless there's something else you'd rather have instead.

Probably these versions, though I may add a red tornado cyclone around the air elemental

Any suggestions on what to rig these onto would be welcome.

https://neverwintervault.org/project/nwn1/model/dd-classic-elementals

cranlox

woooow I adored those elementals. They look great, they would be great on ffvs3

Rd does when you like what you can and want.
If it's to my liking sullivan Lady Bug and Ratchet since my little girl is a fan of Miraculous.

Above that I make a request anyway, I could not put myself to choose, it would be demanding a lot from you. It does when you like what you want that will be super welcome.

I've been bothering you with some old things that I did by private message, I hope you like them.

Randomdays

Sullivan, Lady Bug and Ratchet it is. Agent Anti Venom may sneak in since I like the design.

Working on Sullivan still at the moment - about 10,000 polys. A little high for FFvt3r but seems alright in initial testing.

The texture is 2048 x 2048 and 16 megs. I may knock it down to 512 x 512

Rigging to male_hulking_brute since you brought it up. A little complex for the rigging due to the gear on him.

At present, he breaks up some in the character viewer, but we'll see how he looks in game when done.

Any preference on what to rig Lady Bug and ratchet to? I'm thinking female basic and  BIL's Spy vs Spy.

If no one else wants anything, I may have time to add some modern map objects and vehicles that could be fun.

RD


Randomdays

Hero - I'll download them and see if its a format I can work with.

Added to queue

cranlox

I think that LadyBug in this keyframe would look good. I don't know if it's the female basic one.
https://www.mediafire.com/file/ajma3eh86unnyht/616_American_Dream.rar/file

I didn't know it would be troublesome Sullivan, sorry.

If it is inappropriate or extremely large or heavy, I understand that it cannot be done.

Regarding Ratchet if I think that some version of spy where he can use a pistol and a stick for close hits is more than adequate.
Likewise, I saw Ratchet fight in all possible ways, shooting from his chest, throwing grenades, hitting with species of axes, using baesball bats etc.

heroidosilencio

Thank you very much, Randomdays.

abenavides

Hi Randomdays, back in Feb I asked about bounding boxes for a fix to FF classic mod. You kindly offered to help and I .... didn't get back to you!
If you have a little time do you think you could try to do the fix now? I'll definitely get back to you!
www.alexff.com
Creator of EZ Danger Room, EZFX, EZHero, The JLA Mod, The X Mod, Superhero TV, & famous Hero Recipes, coming up: New mods.

Randomdays

No problem Alex - actually I think I've learned s bit since then and probably do a better job at it then I could have then.

Whenever you get them ready and put together what you need. Probably this weekend and should be a quick I think.

abenavides

cool. thx. Let me dig up the info and send it your way
www.alexff.com
Creator of EZ Danger Room, EZFX, EZHero, The JLA Mod, The X Mod, Superhero TV, & famous Hero Recipes, coming up: New mods.

Randomdays

Cranlox - Sullivan is over half done - just taking a little longer than normal. The American Dream is by Flassh22798 (from the readme) and it looks like its based off of a Tommyboy female_versatile. I don't think I have that mesh/ skin, so that adds to my collection.

I haven't had too much time to do more than briefly look at the other skins you sent.

Hero - All 3 files look like I can deal with them. The Felicia has the adult version pictures, plus a child version and 3 teen versions. I'll be only doing the adult version

Alex - whenever you're ready.

abenavides

Hey RD,
use this link to download the file

http://alexff.com/downloads/small_portal_marker.zip

It just needs a bounding box (i think and hope) to correct the issue.

You can email it back to me when done. Thx!
www.alexff.com
Creator of EZ Danger Room, EZFX, EZHero, The JLA Mod, The X Mod, Superhero TV, & famous Hero Recipes, coming up: New mods.

cranlox

Here I send you a Hunter Lance that is also inspired by the comic version of the agents of Shield series with Nick Blood.
https://www.mediafire.com/file/xih7rr9so6j49ei/616_AS_Hunter_Lance.rar/file

Great that you're moving forward with Sullivan.
It happened to me that the skins for the Viking shaman that I sent you did not work well. In the previous one, it works for me but not in the game.
I'm going to keep trying to correct that.

SuperPoweredYank


Randomdays

Added to the queue. I'll check the files for compatibility with Blender/ Max

I'll probably go round robin, doing one for each person and then back around. That way everyone will get at least one 'present' in case time runs out.

Randomdays

Yank - checked both files and I think I can work with them

Cranlox - Sullivan is done and looks good. Not sure why the texture on his left arm is gray instead of blue, but that's the way it is in the original link.

              The armor on the left arm is removable and is two different pieces - shield closed and shield open.

              Tested in game and looks pretty good. Minor tweaking may be needed.

             Wrapped in a box with a blue bow for Christmas.

Alex - Checked the small portal marker;

         1) 1st got an error on version - your marker was version 4.00. A nif I looked at for FF was 4.02 > This might be your problem.

         2) sent you a rar with 3 versions in it; a) your original
                                                                      b) the original updated to 4.02
                                                                      c) a version with a bounding box taken from the picnic table from in game.

             Hopefully one of these will work


Dana - Next is queue is trying to grab the air elemental linked above and trying to import it onto a Red tornado if I can. I think putting the NWN mesh inside the tornado should get it close to the original MM1 picture.

Below is a pic of an air elemental from the Civ 4 'Fall From Heaven" mod. I think this could be a good base also, but I would probably remove the arms. I moght be able to combine the two together.




heroidosilencio

Thank you very much Randomdays!!! Looking forward for them   :thumbup: :thumbup: :thumbup: :thumbup:

Randomdays

No luck on the Air Elemental for NWN1 - there was no mesh or skin at all on the import, just an armature - I'm assuming that's it some form of advanced emitter.

Might be the same problem for the rest of the NWN elementals as well.

As above, took the Civ 4 Air Elemental and rigged it to Tommyboy's Red Tornado 2 TF with modified kfs. It looks good in game, but the alpha may need to be turned down to make it more visible.

Next on the rotation will be Kaecillius - probably to Gren's Electra since she has two weapons.


Adding to the rotation if there's time, a few for myself that are strangely missing (as far as I know) from characters that have been skinned.

If they've been done, send them my way!



Hulk - General Ross

https://www.deviantart.com/iiidreameriii/art/General-Ross-885520338

Dr Strange - The Ancient One - closest I've seen to the Silver Age version. For this, does anyone know if there are any kfs with a sitting/ floating animation in lotus position?

https://www.deviantart.com/iiidreameriii/art/Ancient-One-884809506


Fantastic 4 - HERBIE the robot!

https://www.deviantart.com/sidgara/art/Herbie-873014817


abenavides

RD, sent you a file via email.

www.alexff.com
Creator of EZ Danger Room, EZFX, EZHero, The JLA Mod, The X Mod, Superhero TV, & famous Hero Recipes, coming up: New mods.

Randomdays

Alex - resent the marker file. On the other file, there was a "float division error" on export. I found it was due to "Editable mesh.00". This was a 1 vertex mesh down near the feet of the mesh - not sure what it was supposed to be, but deleting it fixed the export. File being sent back to you.

I'm holding off on screenshots till they're all done and ready for release around Christmas.

Kaecillius is done - rigged to Gren's Electra - looks pretty good except for the hands. Since hands are difficult to rig, I tried using slightly enlarged hands from Electra. You'll see a little red above the wrists from her skin, and the hands are still a bit off. They look good for most poses, but are a bit stretched when carrying poles or objects.

Moving to Captain Falcon next.





oktokels

Quote from: Randomdays on December 04, 2021, 12:15:44 PMKaecillius is done.

uuuuhhh  :wub:  That's hot stuff !!!!
i'd love to do a Dr. Strange mod sometime....Just imagine the possiblities, Dormammu, Nightmare, Shuma Gorath, Mordo, Kaecillius.... :wub:

cranlox

Oh fantastic! I'll wait for the blue bow gift


cranlox

Fantastic 4 - HERBIE the robot! I had it developed by Dablob if I'm not mistaken.
I'm going to find it for you to pass it on to you

Randomdays

Daglob did do a Herbie, but I think its a different character.

Gren's Dr Strange Vx had a floating lotus position animation called "meditate". I'll try to use to rig the Ancient One to that.

Randomdays

Captain Falcon is done, after giving troubles all day long. Rigged to Gren's Punisher and looking pretty good. Using the hands from the Punisher worked out a little bit than last time, though still not perfect. Rigging wasn't that bad, but texturing was a mess. The mesh is made of over 20 pieces and each had its own texture - and some kept getting their texture assignment overwritten by another piece's skin.

It actually came out with an interesting version worth keeping that I'll release called "Captain Red"

I wound up having to break the mesh into 3 groups on export to prevent it - the hands, legs and hips, and chest and arms.

I think a simple rig for HERBIE next.


SuperPoweredYank

Quote from: Randomdays on December 06, 2021, 01:41:46 AM
Captain Falcon is done, after giving troubles all day long. Rigged to Gren's Punisher and looking pretty good. Using the hands from the Punisher worked out a little bit than last time, though still not perfect. Rigging wasn't that bad, but texturing was a mess. The mesh is made of over 20 pieces and each had its own texture - and some kept getting their texture assignment overwritten by another piece's skin.

It actually came out with an interesting version worth keeping that I'll release called "Captain Red"

I wound up having to break the mesh into 3 groups on export to prevent it - the hands, legs and hips, and chest and arms.

I think a simple rig for HERBIE next.

Ooh awesome! Can you post a picture yet?

Randomdays

A peek at "Captain Red" on the Punisher kfs.

The mesh's helmet is in 4 pieces, each with their own texture. The front texture is the one with the falcon. Since it started with a few of the other skins overwritten, I just went ahead and put the falcon texture almost everywhere - it doesn't look bad for a screwed up mesh.


heroidosilencio