Freedom Reborn

Here I am going to upload the links of things I have been doing
HERE (https://www.mediafire.com/file/0cc6du3pe26yvtz/MIB+Alpha.rar/file)

DETECTIVE CADLAN
HERE (https://www.mediafire.com/file/n4lgrntkzl5gl25/ARG+Detective+Cadlan.rar/file)

I don't know the characters, but very cool work!

Here you can download both Alpha and Cadlan, they are uploaded through a link to media fire in the "HERE" below each video

WORKING WITH DAMIAN PRIEST

I definitely like the toad that came out perfect in texturing.
(https://i.imgur.com/0eTziTh.png)

Good job on those.

Yes, this toad is very usable.

I've been practicing and trying to improve on simple things to see if I can come up with healthier ways to achieve what I want, here are some weapons in Obj format

Enchanted Battle Axe
(https://i.imgur.com/46YjCz0.png)
https://www.mediafire.com/file/a3xjeluf9xddsnz/Mystic+Battleaxe.rar/file
https://www.mediafire.com/file/pqijwl4ydz1plvf/Enchanted_Battle+Axe.rar/file

Technological Battle Axe
(https://i.imgur.com/1Huifnm.png)
https://www.mediafire.com/file/6d1iqdtjb4wd4lt/technological+Axe+01.rar/file
https://www.mediafire.com/file/70rh9rqj4ppbiqv/technological+Axe+00.rar/file

LavaWorker
(https://i.imgur.com/60SnDo4.png)
https://www.mediafire.com/file/12e0g3jmjuyznhg/lava+worker.rar/file

Goblin of Bat
(https://i.imgur.com/RHesHQ7.png)
https://www.mediafire.com/file/ppszsblz1jwe7fc/Goblin+of+Bat.rar/file
(This failed negative texturing of the character's back, the entire rear view of the character would have to be fixed.)

Everything is shared for use if anyone wants it.

AND THE TOAD!
https://www.mediafire.com/file/gbeciji5vwrc799/SAPO_VENENOSO_MEDIEVAL.rar/file

Here is a video of the great work of Daglob and RD.
I added the bomb I made for the coyote, and relocated the helicopter to his hat, removing his backpack, being more faithful to his cartoons.

(https://i.imgur.com/HNoSSID.png)
new toys for batman
https://www.mediafire.com/file/bjbje7txridpksb/zxbatarangIce2025.rar/file

Hey, Great work with Gadget! I had already thought about attaching the helicopter to his hat.

Capturing the same ninja from Jackie Chan's adventures, I obtained different results that came out very well textured although none of them looked 100% like the objective.
There are a total of 5 different models that seemed very acceptable to me, worthy of any ninja game.
ninja 1
(https://i.imgur.com/N8RNjLa.png)
https://www.mediafire.com/file/i052xpo2n2lp1nc/NINJA_SHADOW.rar/file
ninja 2
(https://i.imgur.com/n0jNjxS.png)
https://www.mediafire.com/file/dh1x7ldtzgpxusv/NINJA_SHADOW_2.rar/file
ninja 3
(https://i.imgur.com/smsiAzM.png)
https://www.mediafire.com/file/bg5mctxi691ciiq/NINJA_3_SHADOW.rar/file
NINJA 4
(https://i.imgur.com/OdyKCrk.png)
https://www.mediafire.com/file/smlwsc99flj3fa2/NINJA_4_SHADOW.rar/file
NINJA 5
(https://i.imgur.com/BqwFl2x.png)
https://www.mediafire.com/file/veyi5ctbxf9qjm4/NINJA_5_SHADOW.rar/file

NINJA 6
(https://i.imgur.com/2ekRZzL.png)
https://www.mediafire.com/file/z9x6ounbd448m1i/NINJA_6_SHADOW.rar/file

LAVA MINION
(https://i.imgur.com/cSSxLcj.png)
https://www.mediafire.com/file/k8w1grvs7i7ljx4/LAVA_MINION_1.rar/file

LAVA MINION 2
(https://i.imgur.com/FqPocpc.png)
https://www.mediafire.com/file/mma1ezzlj2pdvhr/LAVA_MINION_2.rar/file

COUSIN TOM
(https://i.imgur.com/8RO0Gvj.png)
https://www.mediafire.com/file/plveblqoktmrelz/COUSIN.rar/file

I continued trying to make trial and error models with different sources.

There were few corrections to be made to the texture and finally things were going to get difficult for our dear inspector.
DR CLAW ENTER IN THE RUMBLE
HERE! (https://www.mediafire.com/file/sh41g892em19bgj/DR_CLAW.rar/file)

He looks good Cranlox. Great Job!

thanks!

Other models from a nineties animated series that there is no material for them,Ja-kal and his team

(https://i.imgur.com/ntj6KgF.png)
(https://i.imgur.com/kP1O5UN.png)
(https://i.imgur.com/EGMm1Vj.png)
(https://i.imgur.com/gFCcoqL.png)

The bodies turned out well, the heads not so much, although understanding that they are living zombie-type mummies, they don't look so bad. I would like to retexture the faces or put masks on the face part.

NEFERTINA CAPTURE OF HEAD ONLY
(https://i.imgur.com/9p5sD8I.png)

Those are nice. I can probably grab th ebusts, but since they're stls, skinning would be a pain

https://www.desirefx.com/?s=mummies+alive (https://www.desirefx.com/?s=mummies+alive)

This is the form without armor, because they are very complex and in turn to use their movements they would need to have all the keyframes made especially, because they had specific movements to use the powers of their armor.
That complicates things too much, in the mummy way without becoming the use of armor they have the simple powers of being living mummies, that's why I thought of that mode.
I'm going to try to make the loose heads like the girl's for the other 3.
I could also give animation with AI to the static images of the busts to capture the animation model, with the giant monster it turned out quite good even with poor image quality.
I estimate that I will upload all this raw material in this thread and from now on if you want to use or give life to any of them it is more than grateful and I am happy.
I have the issue that it is impossible for me to put the skeleton on the models, although I tried many times to install the appropriate programs and follow steps.

Sphinx?

Cale Tucker from titan AE
(https://i.imgur.com/T5HWqUe.gif)
By animating an image and capturing the head, I was able to obtain an acceptable model of the head of the protagonist of this much-forgotten movie.
Simple but I was satisfied
HERE (https://www.mediafire.com/file/yuhwk9i3d2q8fj5/TITAN_AE_Cale_Tucker.rar/file)

Really cool stuff  :thumbup:

THANKS DEAN, I'll be here this afternoon trying to get some things done and share some successful models here.
I'd really love to be able to put the skeleton together and take along the ones that turn out well.

Great cranlox! I like specially this lava minion. Would be useable for doing demons or something like that.

Although his face is never seen in the original series, I had already seen this version of Doctor Claw hahaha. I wanted to try to do his henchmen, but they have a strange body to do. Maybe male_rotund would look like one of them. I also wanted to do Doctor Claw's car that I saw the other day in chapter 16.

Nice work on the face and the tattoo!

use the image of the models that RD provided to make an AI animation and a screenshot of that video to capture the model came out good for the shoulders not the face/head, I'm going to try sectioning the head apart. Maybe these shoulders on the previous body would just lack a decent head modeling. has the texture already assigned to the object.
(https://i.imgur.com/sMg3y86.png)
https://i.imgur.com/sMg3y86.png[/img]]SHOULDERS ARMOR MODEL (http://[img)

Here's some different views of the same model that might help

https://www.cgtrader.com/3d-print-models/games-toys/toys/mummies-alive-collection-armor (https://www.cgtrader.com/3d-print-models/games-toys/toys/mummies-alive-collection-armor)

I took 3 screenshots of a cartoon head, this version came out better and with the hollowed out eyes, an internal red ball should be put on the head to fill those same holes.
You could put together a pretty decent Armor with these 3 parts:
BODY
SHOULDERS
MASK
(https://i.imgur.com/O1eqF8r.png)
(https://i.imgur.com/u6QA6yn.png)
HERE THE MASK MODEL
MASK ARMON (https://www.mediafire.com/file/ofza8yt1lrs5vbi/MASK_FOR_HEAR_ARMON.rar/file)

White ninja model that turned out from a cartoon mummy, sometimes it's funny when he misinterprets it
(https://i.imgur.com/ejFWXkc.png)

https://www.mediafire.com/file/hjhh84c6bccgh6c/White_Ninja.rar/file

(https://i.imgur.com/BS9OFj4.png)

I was with the heads of the triceratons, they turned out quite well and can be transplanted to different bodies easily

(https://i.imgur.com/HeK9QE0.png)

This afternoon I upload the 2 models and the quick test on a body that I made to Mediafire
As always everything is free to use if anyone wants to make a different or better Triceraton

(https://i.imgur.com/Cv8m15c.png)

Nice work, Cranlox!  He looks great!

The Triceratons! I like them very much. In the first TMNT episode from 2003 that I saw the turtles were fighting off a Triceraton invasion.

By the way, I have a Triceraton mesh. I think the author is detourne_me.
https://www.mediafire.com/file/3s644ckrt46d4xf/TMNT_Triceraton_dm.zip/file

TRICERATON 2003 HEAD
https://www.mediafire.com/file/bwuy0el6oqeazqp/TRICERATON_HEAD_2003.rar/file
TRICERATON EXTREME HEAD
https://www.mediafire.com/file/3wf2iem8vn09h97/TRICERATON_EXTREME_HEAD.rar/file
TRICERATON EDIT IN A BODY
https://www.mediafire.com/file/9bbtw6s7yz3ur9y/TRICERATON.rar/file

PAW PATROL PACK
CHASE, MARSHALL, EVEREST & SKYE, EVEREST, SKYE, ZUMA, ROCKY, ROCKY IN TRUCK, DWAYNE, LIBERTY, RUBBLE AND ROBOT DOG
here! (https://www.mediafire.com/file/q7vxkccvm4dqvnt/PAW+PATROL+DOGS+IN+VHCLS.rar/file)
ONLY THE FIRST THAT CHECK
(https://i.imgur.com/issujxB.png)

Very nice work on all of these mesh conversions, etc.. Cranlox!

Dana

Very nice dogs, fx?

working in Arkayna from Mysticons
(https://i.imgur.com/7VSmOSA.gif)

Here is the Liberty correction already done and the alternative palette, and a lollipop dog that my niece loves and uses to play with her paw patrol, she asked for it and had to come in the Freedom version, I made the FX of missiles calculated by eye for the cannons and it turned out well.
Since I was distracted from separating those textures well I will upload it in the next few days but the character is already done.
For the lollipop dog in 2 photos I made an animation with AI and a capture of that video.
It came out pretty well. The motorcycle is a drawing passed to an AI image with the same process.
The cannons are from models resources.

(https://i.imgur.com/kpALP8o.png)
(https://i.imgur.com/Vd2oGQT.jpeg)
https://www.mediafire.com/file/kcz8o6chutqikwe/PAW+MILA.rar/file
https://www.mediafire.com/file/h694ka34jnudtxf/PAW+LIBERTY+MOTO.rar/file

Working on 4 characters at once because all 4 gave me problems: Arkayna, Emerald (mysticons)
Montana, Ox (Marvel)
Arkayna and Ox coming out soon

Those vehicles are adorable, Cranlox!

Thanks Benton, I did some stuff with the Paw Patrol, all the main characters are in the vehicles of the series.
Animating them with their super powers would be extremely complicated.
Working on Mysticons to complete the group of the 4 girls and on the enforcers

My audio captures to use the same Fortisimo fx with other audios, is with the Latin Spanish version
https://www.mediafire.com/file/d1kkdfsjyqrmz7q/RENA_ROUGE%25282%2529.rar/file

TOXIN Stephen Graham
A great actor in a great character, totally wasted. I hope he can be rescued in some way, the design I took into account is the least exploited and the one I always liked the most. I chose to put the actor's face sacrificing the Green Tongue, a version could be made with the tongue covering the face.
Red and green colors replacing the texture files
It is recreated using Daglob's work on Heap as a base.
(https://i.imgur.com/1dWqrNm.gif)
(https://i.imgur.com/gds6Rd0.gif)
HERE (https://www.mediafire.com/file/bri1afwiu2r4s0i/TOXIN+Stephen+Graham.rar/file)

I'm sharing a surprising result of the process I've been doing in case anyone wants to bring it to life. I know there are some very good conans out there.
(https://i.imgur.com/AHzh0Um.png)
Here (https://www.mediafire.com/file/pqo8jt92ofm7xrm/Conan.rar/file)

here : Blas!
(https://i.imgur.com/3hP4g5G.gif)
Trying to make a short list of local characters as well (many failed so hard that they only had 1 number or less)
The mega hits are so cartoonish and exaggerated in their facial features that it is complicated:
Hijitus, Boxitracio, Largirucho, Paturuzú, Paturuzito, Clemente, etc.
HERE! (https://www.mediafire.com/file/kvz2tyoxtx85ukg/ARG+Blas.rar/file)

Not familiar with Blas.

The Conan and Toxin are great!

There are some great Conans for the game already, but I've been wanting 2 specific versions;

1) John Buscema's early Marvel run in the 70's when he took over from Barry Smith. This is the one I grew up with and identify the most with. Your version is very, very close to that. Well done!

I'll be more than happy to do rig in a few days when LotR is done, at least for the moment.

2) The other version would be the one from the "Conan the Adventurer" 90's cartoon. As far as I know only Dr Ruina has done anything with this show, doing one of the villains. I'd love to have all the heroes and villains from the show in game.

Even though I know thousands of comic, manga and media characters, I see that there are still many that I don't know hahaha. (Who is Blas?) This Toxin is perfect!
One of my projects is to make some old Spanish characters like Captain Trueno, Aguilucho, Capitán Coraje, Purk...

I think I've seen a version of Conan similar to Barry Smith's Conan. I'll check my files.
I did the Marvel comics version of Thoth Amon years ago.

This skope did by detourne_me seems similar to Barry Smith's Conan.
https://www.mediafire.com/file/kt4rzk2xfh63sor/conan_dm.zip/file

I don't know any of the latter, I download them anyway

I found a free clemente model but I don't know if it's possible that can make something that has a ball attached to it.
https://cults3d.com/es/modelo-3d/arte/clemente-personaje-fan-art

Doc - Thanks, I've got that Conan already.

Cranlox's Conan rigged and ready to go. More info on my thread.

(https://i.imgur.com/XtHbgOO.png)
Another capture failure, I think the most useful thing is if they can remove the tail or legs or insert eyes and beak and leave it flat.
here the model (https://www.mediafire.com/file/7s43ib8epkban3m/bird+of+conan.rar/file)

today is definitely not a day of captures

Attempts to kull the image, the costumes don't really look like it
(https://i.imgur.com/4UCAqm0.png)
here (https://www.mediafire.com/file/n20nohauua10oue/kull07.rar/file)

(https://i.imgur.com/6ocq3AO.png)
here (https://www.mediafire.com/file/jq63nwwnjgw62q5/kull09.rar/file)

(https://i.imgur.com/5AIx9AO.png)
here (https://www.mediafire.com/file/dfwv6vyv8jwvrjr/kull11.rar/file)

The Needle isn't bad.

The second Kull comes closest I think.

Here's a link of a pic that might help you - not sure

https://gamesandcomics.it/catalog/en/action-figures/39512-kull-the-conqueror-ultimates-kull-comics-version-action-figure-0840049849822.html (https://gamesandcomics.it/catalog/en/action-figures/39512-kull-the-conqueror-ultimates-kull-comics-version-action-figure-0840049849822.html)

But if they're high poly like Conan they would be a pain to try to rig. While it was worth it for me to get Conan working, it took many hours to get it to function as well as I could to get it in game.

The best results I've seen so far for your captires are just doing the high poly head and putting it on a normal body - it makes rigging a lot easier. That worked great with the Enforcers, but I don't think that's available for characters like Needle.


That's why I was thinking of using normal FF skopes and skins if we can't get a good match to work with.

I just sent Dean a PM about something else and don't want to bother him again, but maybe you or Doc can throw something together in a traditional way if nothing else works..

Doing some searches, I just found some low poly phoenixes that use a traditional skin and were free to download.

It might be worth it to try to do some reskinning and try to and rig one of them.

(https://img.cadnav.com/allimg/170721/cadnav-1FH11PQ4.jpg)

https://creazilla.com/media/3d-model/1795169/phoenix (https://creazilla.com/media/3d-model/1795169/phoenix)

https://www.models-resource.com/mobile/summonerswar/model/9580/ (https://www.models-resource.com/mobile/summonerswar/model/9580/)

https://sketchfab.com/3d-models/phoenix-243fea4f846f44d18d37bf371272b7ec (https://sketchfab.com/3d-models/phoenix-243fea4f846f44d18d37bf371272b7ec)

https://www.cadnav.com/3d-models/model-41147.html (https://www.cadnav.com/3d-models/model-41147.html)

https://sketchfab.com/3d-models/star-aventure-invocation-phoenix-3ccf445e412a409d8e3eeeeb494bb730 (https://sketchfab.com/3d-models/star-aventure-invocation-phoenix-3ccf445e412a409d8e3eeeeb494bb730)

To me the second one seemed better with the lower part of the third, if capturing minor areas instead of an entire character is more likely to turn out better, or using several elements as I did in the Toxin and in the villains of Men in Black.

The main problem is that the captures remain high poly even when doing them at the minimum.
I don't know if it wouldn't simply be a good idea for you to cut and add the tail of the phoenix that I captured in flat color since it came out exactly like the red wing that Falcon has, with that and an fx on the head for the fire-capable hair it looks good

Bronx, I don't know how much trouble it gave you, I was using it to play and it really turned out very well and even more so considering that the game is played from quite a distance for quite a long time.

Model resources is extraordinary, they always have great models and they save material that would be lost, Disney Sorcers Arena that had been playing it was canceled and all the progress I had in the game was lost, luckily some models of that beautiful game were saved on the model resources page.
All the Summoners War armies are really very nice and quite ideal for freedom.

Feel free to ask and use whatever you want from what I did and do and what I could do. As long as I have the time, I'm happy to add things for freedom force vs 3r

I was playing Sorcerer's Arena as well until it went down. Deviant Art had a huge backup I grabbed of most of the models, including most of the arenas and characters - that's where the Gargoyle models I used came from.

Bronx really wasn't all that bad compared to Conan since he was compact. Conan had a lot of extra things on him like the shoulder pad, loin cloth, and boots.

For the Conan characters, it would be very nice to have them, but if not, then maybe later down the line somewhere.

I appreciate the effort either way.

Doing the best I can within my abilities, is based on the skin of my ancient Viking
(https://i.imgur.com/CZ0vPnW.png)

Stripperman the snake :lol:
I have no idea who he is

Hey, the villain from the Conan cartoon, nice!

I had assembled several things and I needed to make the skin for the base of the body (I still had the Viking one from the previous image) and I made a mistake and didn't save it! I'll have to redo it from scratch

Given the issues I had with Wrath-Amon, and later with Chuck Walker, Hondo and Deacon, I tried to go back to basics with Lady Belit.

Meed to do all the details and give her his sword.

(https://i.imgur.com/SDTIBkp.gif)

looks like Agatha from MCU

Practicing the head exchanges, I used the work that is 100% Detounme to put the head as a result of capturing the video, it was a quite acceptable Iron Robert

(https://i.imgur.com/j5siXru.gif)
HERE (https://www.mediafire.com/file/7ow2qduqm51unj3/MCU+IronMan+AOU+DM.rar/file)

An icy character that I think does not have anyone from his universe: Glacius
(https://i.imgur.com/BJNPa5L.gif)
Here! (https://www.mediafire.com/file/h68yfwn0j3krc4v/VG+GLACIUS.rar/file)

I've been experimenting with multi-layered textures and I was amused by what I used to test, basically a live action version of the favorite turtles, the only disadvantage is that they have more fingers than the official ones. They can be interpreted as pioneers of the cranloxverse hahaha
The problem with this is that it doesn't let me see the number of polygons and to save the project I have to use fbx. I suppose it's the same minimum
(https://i.imgur.com/qtl1GCR.png)

Very nice Cranlox

 :thumbup:

I managed to migrate multiple textures to a single model, changing only that texture and the entire model of 4 different ones is based on the same one.
That would allow it to be animated only once and make the 4 versions of the turtles perform in the initial example.
I did the same with King Kull, the initial model of the action figure left a lot to be desired.
TURTLE LIVE ACTION LINK:
https://www.mediafire.com/file/7ikdi94aoyx3u19/TURTLE_IN_LIVEACTION_STYLE.rar/file
KING KULL PREVIEW
(https://i.imgur.com/nEVyUHo.png)
I managed to migrate multiple textures to the same model, changing only that texture and the entire model of 4 different ones is based on the same one.
That would allow it to be animated only once and make the 4 versions of turtles perform in the initial example.
I did the same with King Kull, the initial model of the action figure left a lot to be desired.
I tried to correct it as best as possible and generate a smart texture with Sintetic Designer and it turned out better although a bit "creative"
(https://i.imgur.com/djIwPkn.png)

I understood the process better and started to see if it was possible to download the polygons, but when downloading in one program the skins are no longer consistent in the other.
I also found it fun to make this King Kull variation pack.
https://www.mediafire.com/file/30wxoqlx9p4nv6c/KING_KULL_MULTISKINS.rar/file

 :thumbup:

I'll try to rig him tomorrow.

Great job!

A great job, cranlox! :thumbup:  :thumbup:

Great work cranlox!

(https://i.imgur.com/lyLqDtQ.png)
I made a new attempt with much fewer polygons "in theory"
https://www.mediafire.com/file/46thfhu84jrvsm6/red1.rar/file

6K polys - down to 4k after removing doubles of the vertices. Much improved from the first version

The definition of the face is much better than the first one, though the skin is a little strange at the mouth and nose.

The way the program scatters the skin will make it bit hard to work with.

I'll see if I can work with it, maybe at least grab some parts for the one I started.

(https://i.postimg.cc/zXpKc8m4/Image-0.jpg) (https://postimages.org/)

It's a shame that I can't solve lowering polygons and you can use everything I share freely, I was trying several things and modeling some based on image and others with capture, I suppose that based on how difficult the source and design is, the level of complexity changes. I made a gargoyle woman, a Modok Mcu, a living brain marvel, Charoca from Elena from avalor, and IronVulture from Ultimate Spiderman. Basically by trying to understand differences in the processes and understand retexturing. I think a lot escapes my understanding at the moment, there is an option to animate but it is for making scenes and it only allows you to move the models as a mass in the pre-established scenarios. And yes the face is horrible!

Glacius there is something missing
It doesn't appear in the game list when I load it

Quote from: RommyNa on February 18, 2025, 08:26:17 PMGlacius there is something missing
It doesn't appear in the game list when I load it

Try downloading it and checking everything again, it works fine for me.

Some of the new things I've been making or remaking

Lavaman ready updated
(https://i.imgur.com/7T4EDRI.gif)
https://www.mediafire.com/file/cmdq2buf8ivbo5g/NMOF+Lavaman.rar/file

Todosoga ready and updated
(https://i.imgur.com/0cBNmhZ.gif)
https://www.mediafire.com/file/zdfuf7eyjzmi962/NMOF+TodoSoga.rar/file

Billy Blazes model from RescueHero (fisher price), serves as a firefighter I know he was looking for firefighters a while ago in the DR
(https://i.imgur.com/PiBfi7G.gif)
https://www.mediafire.com/file/si72xd2rl2imtdk/Billy_Blazes_0213082757_texture_obj.rar/file

Claws, the female lynx from RescueHero (fisher price)
(https://i.imgur.com/P5odPjR.gif)
https://www.mediafire.com/file/lb37p4orwkiida1/CLAWS+RESCUE+HEROE.rar/file

Builder American (fisher price )
https://www.mediafire.com/file/on25yndofca81wu/BUILDER.rar/file

Gargoyle Girl army
(https://i.imgur.com/UXItyX5.png)
https://www.mediafire.com/file/4u48ekdayjndusa/GARGOYLE+WOMAN.rar/file

Needle from Conan
(https://i.imgur.com/htwJhHa.png)
https://www.mediafire.com/file/otf1kkau0vzxxmv/Needle.rar/file

MODOK from Marvel (model from capture cartoon )
(https://i.imgur.com/rcA3zXg.png)
https://www.mediafire.com/file/zanek9hco53p2ne/MODOK_0218195324_texture_obj.rar/file
MODOK FBX
https://www.mediafire.com/file/1eubgpsn5q7nn9q/MODOK+FBX.zip/file

TODOSOGA, LAVAMAN AND RENA ROUGE (RD) IN ACTION WITH FX

Nice to see meshes of the Paw Patrol in in-vehicle action! Now I hope there are meshes of them, both outside of their vehicles, and of when they're superheroes (the Mighty Pups)!

one of the few action figure characters that I bought 2 times the villain Numbskull from Police Academy (logically one had broken and I lost many parts), I took a screenshot of the figure's head from the photo itself and had it textured with AI using SinteticDesigner, I was very satisfied, it would be quite impossible to make it interchange 3 helmets so for now it will be like this to hit the bat and shield itself by putting its head, in a while I will look for the helmets to photograph from various angles and animate them with AI to see if I can generate a correct modeling of the helmets (in case it comes out well it will have 4 versions in different folders)
I do not consider it a priority given that I really liked how it looked in the original thug2 of the game
(https://i.imgur.com/l1ooTEC.gif)
https://www.mediafire.com/file/234n5dfcbqnov8q/Numbskull.rar/file

I like the head of this Numbskull. Hmmm, maybe it could be useful for my Tobias Whale skope...

I like Lavaman and Todosoga. Nice work! I would like to know more about these characters.

Lots of cool (or hot in the case of Lava Man) stuff here!  Needle!  The Conan materials are coming along nicely!

(https://i.imgur.com/Qun5Kna.png)
I'm having some personal problems, but when I had some time I was able to contribute something
was able to quickly make a new character, in this case it is a Sauroflecha Villain from NMO
https://i.imgur.com/Qun5Kna.png[/img]]HERE (http://[img)

Sorry to hear that you are having problems. Hope everything works out. Be well.

thankyou Wildfyre,
I hope I can be a little more available and calm for a few days.
And out of the heat wave!

MR. SLEAZE (villain from Police Academy
(https://i.imgur.com/QXLfAtb.gif)
(I'm not going to give him a device that lifts his tie and has a laser, but this time he just uses smoke grenades haha
another old action figure that returns but in FFvs3R)
HERE (https://www.mediafire.com/file/lvp4a332bgwelq8/MR+SLEAZE.rar/file)

(https://i.imgur.com/QmsHiLi.gif)
JACK BAUER from 24
HERE! (https://www.mediafire.com/file/l47mngex0pvyq8o/SERIES+JACK+BAUER.rar/file)

Continuing with the wave of characters that had failures in sales, comes the heroine ChicaAmbiente (or in English AmbientGirl), a young woman who, after inheriting the powers of the South from her native family, can manage the forests or the glaciers. She came out a little more adult, her was more of a teenager and less adult I came out older
(https://i.imgur.com/0FbSiLZ.gif)
(https://i.imgur.com/X8GkcY1.gif)
(https://i.imgur.com/xQK4V36.gif)
(https://i.imgur.com/siuyHay.gif)
HERE! (https://www.mediafire.com/file/kvz2tyoxtx85ukg/ARG_Blas.rar/file)

The villain with the tie looks good, unfortunately he lacks the animation of his missile tie

A great work with the Chica Ambiente skin. I'd like to learn how to make skins of actors' faces to make various movie characters.

Now in Argentina we have the historical record of Argentine magazines of all times digitized, including comics, which makes it much easier to recover free global access to lost and forgotten characters like the local ones: Hernan el corsario, El fantasma Benito and many others. And access to very limited numbers like El Laucha and the ones you surely didn't have, which is the Patoruzú collection.
I will surely look for and try to solve some of them and read many others.
Many characters are very difficult to bring to Freedomvs3 because most of them have a similarity in stroke to Popeye in the 30s, so that typical caricature exaggeration complicates everything quite a bit due to the rounded and wavy nature of their cartoonish strokes.

The ghost Benito doing his mischief, abusing his ability to become visible, invisible and intangible.
(https://i.imgur.com/z2Btmn5.png)

Apart from that, I was developing another forgotten one, WildWing, which was a multiple headache for a few days, maybe I will rework its texture later with greater details.
Regarding the Sintetic program, I have been exploring work options that I hope to share today when I finish the work.
(https://i.imgur.com/rfbkLua.gif)

Very cool! Can these comics be found on the web?

yes, it´s online.

Some skin updates for Bronx and Conan that RD made with my initial input from the captured model.
09 skins for Bronx
12 skins for Conan
The best way to view them is in nifskope or in the game directly, in the preview they still mark the standard skin
It is totally usable

(https://i.imgur.com/b0HbX9p.gif)
HERE SKINPACK BRONX (https://www.mediafire.com/file/gy90mgnc8c6nlr2/SkinPackBronxRDCX.rar/file)
(https://i.imgur.com/wLJrESc.gif)
HERE SKINPACK CONAN (https://www.mediafire.com/file/xp8mntwuji07qyn/SkinPackConanRDCX.rar/file)

And Wildwing with fx
https://www.mediafire.com/file/87xvwwoprgu2gqe/DISNEY+Wildwing.rar/file

This Bronx is perfect, and is also useful for doing another monsters!! :thumbup:

Apparently I have a serious problem with my PC's BIOS, it tells me it's corrupted and it turns off. I'll probably need to take it to a technician to remove the soldered battery, put a battery in per connection and reset the BIOS. This setback will keep me out of sharing content for a few days, added to a possible surgery that I have to face, I estimate that I will be quite relegated.

Yes, old Conan had a wardrobe after all.

Oh, I'm sorry to hear that. :angry:

Sorry to hear that cranlox. I hope everything goes well with your surgery. PC too.

thanks WildFyre :thumbup:

Good wishes as well Cranlox. We'll be here waiting for you.

Be well Cranlox! I hope it's nothing serious and we look forward to your creations for the game.

Get well soon Cranlox!

I'll be sharing the effects as soon as I can, they turned out nice. The heat stroke here is exorbitant, it went over 47 degrees Celsius and we had a massive blackout. It was truly unbearable.

I'm going to try to retexture the model with Sintetic, let's see if something better comes out.
(https://i.imgur.com/osyuH5P.png)

Nice to see you, cranlox! Here we are in winter. (I hate the heat). I see that you can do great things with sintetic. I don't know this program.

I added Ras' voice, I put the daggers back on and the flag of the league of assassins as a rally
https://www.mediafire.com/file/ohmwqa70hamyhk0/ras+fx.rar/file

Alex with some effects to give him a different gameplay, since he wouldn't be very powerful.
https://www.mediafire.com/file/84wkdecizl9gxil/alex+fx.rar/file

Alex is a creation of RandomDays and Ras is from Cournall, I only gave it the effects and settings with sounds

I used tripoIA which is quite useful, I suppose with 64-bit architecture on your Windows or higher, which is complicated for me in most cases, but I still found it quite nice what I was able to do which was to experience a capture of the Snarf action figure from Thundercats.
You can configure the number of polygons on the page but I think it is for a PC that is noticeably more advanced than mine because it keeps freezing just by opening the site.
https://www.tripo3d.ai
Here is a sample of what I was able to do with Snarf, I clarify that it has the texture and the mtl but I was not lucky to open it without my PC freezing

(https://i.imgur.com/OykYkyM.png)
https://www.mediafire.com/file/5duau6aphi8mvfg/snarf+figure.rar/file

So that the WildWing is not alone, Mallory
(https://i.imgur.com/qpRv8LY.gif)
HERE (https://www.mediafire.com/file/wuzkbf27cafqkif/DISNEY+Mallory.rar/file)

Nice, great job cranlox!

I was looking for the Doc McStuffins files, and I didn't find them, but I did find the Mike Mirrorverse and I decided to upload it to my mediafire so I wouldn't lose it again.
(https://i.imgur.com/t744o61.png)
https://www.mediafire.com/file/x90dfwfj5multtn/MIKE+MIRRORVERSE.rar/file
I really like some of the Mirrorverse designs and I really hated others (tinkerbell)

I'm going to try to get this caveman's face as a face part for and enemy
(https://i.imgur.com/BzNfw37.png)

Very nice models
I hope you finish them soon, they look very nice even though I don't know them.

Nice work, cranlox! And I like this dinosaurs

Megamono
(https://i.imgur.com/AZJhkl6.gif)
it`s a quick edit of Dean´s Vulcanus, It is almost impossible to make the coconut shoulder pad, but it is still understandable.

Very cool! :thumbup:  :thumbup: Who is this character?

What Doc said. I want to learn more.

Starla from "Blaze and the monsters machines"(nickelodeon)
(https://i.imgur.com/jDYQ0d7.png)
https://www.mediafire.com/file/t4o7pehn20ftd6b/Starla.rar/file
FX starla shot
https://www.mediafire.com/file/9rc4ui9cojegg29/zxStarLightbullet.rar/file

POLAR BOY NEW FX
TAKE HERE (https://youtu.be/J4RlFOSg0y0)

Polar Boy head id hilarious.  :thumbup:

I like all this ice fx. :thumbup:  I really needed them for some ice characters.
Where can I download them?

Here I upload the Polar Boy FX that I made and showed, I put his textures and some ice sounds, I don't remember which ones I chose but I always solve within those ice sounds for that type of ice attacks.
https://www.mediafire.com/file/e9kdva440d39mfk/FX+FOR+POLAR+BOY.rar/file

BIG CHILL Big Chill also has his personal ice attacks.
The character is developed by Dean
fx files
https://www.mediafire.com/file/rh0bzfh1yszj9ru/fx+big+chill.rar/file

A new head to Diamond head, and in this version the suit of my first action figure of him.
This character is developed and make for Dean, I only change the head
here the link:
here!!! (https://www.mediafire.com/file/ty0kscp5kmym4xv/Ben10+Diamondhead2.rar/file)

Fantastic updates :thumbup:

Fantastic work! I just rearranged a few things! I'm glad you like it anyway!
Gray Matter, haven't you done it or did I miss it? I remember seeing one of those little ones, but I couldn't find it in my files.

No I've not attempted him yet. Maybe at some point I will.

An alien cross between Humungousaur and Diamondhead, which I ended up making almost without realizing it by looking up techniques and practicing.
I called it Diamondsaur.
(https://i.ibb.co/xqPsgDqn/bandicam-2025-04-08-18-55-54-674.gif) (https://imgbb.com/)
https://www.mediafire.com/file/b050zvvfehyz95q/Ben10+Diamondsaur.rar/file

Theo from Power Rangers Jungle Fury
(https://i.ibb.co/6R2mzXrD/bandicam-2025-04-17-04-28-16-308.gif) (https://imgbb.com/)
https://www.mediafire.com/file/l97wu2uhfop642z/MMPR+Theo+JF.rar/file

I made just a small contribution to Dean's great creation, I added the ears from the Neca figure, since they were missing.
(https://i.ibb.co/W4K7rW1M/bandicam-2025-04-23-04-41-28-138.gif) (https://imgbb.com/)

Obviously, if you want Dean to lower it or change it in your pack, that's your choice. Let me know if that's okay with you and if it's not a problem.

https://www.mediafire.com/file/plthhu61wtq1q58/Tmnt_Cryin_Houn.rar/file

Brilliant thank you :thumbup:
I realised after I'd uploaded the wrong file :doh:  but your ears are better than what I was using. I've uploaded the right file plus the finished skin and your ears to its own download in my random folder.

great Dean! thanks!
a model that I captured and that I think turned out pretty well
(https://i.ibb.co/RkghgTD5/elroy-jetson.png) (https://ibb.co/LX0Q0dZG)
is in fbx with
https://www.mediafire.com/file/2knh25i8ja7nq0s/Boy_in_Overalls_0424213855_texture_fbx.zip/file

These are the heads of some other characters that I'm happy with the results I got, I'll see if I can do these 4 little by little.
(https://i.ibb.co/tp7GRT54/working-in-this.png) (https://ibb.co/RTxF8kW9)

Neat. Elroy and the rest of the family are on my list

 :thumbup:

Ranger Smith !
(https://i.ibb.co/jP0x105K/ranger-smith-static.png) (https://ibb.co/Mxwj3whT)
https://www.mediafire.com/file/l0wne0p924wna1b/CRTN+Ranger+Smith.rar/file
(https://i.ibb.co/ZzGddTD9/ACTION-RANGER-SMITH.gif) (https://ibb.co/s9bjj3Y7)

Totally awesome

Hey Boo Boo! I.m gonna get me a picinic basket!

I've got a yogi and a Boo Boo that I need to convert. The only missing one from the group would be Cindy Bear

I've done a basic skin for your blue ranger.
(https://i.imgur.com/xv6bLLv.png)
I cant skin the helmet though.
In my random folder.

What an amazing job he's done with the character's classic skin.
Do you want me to try capturing the rest of the team's helmets and mounting them on the same model, swapping out the heads to create the entire team?
(https://i.ibb.co/C51B0gdQ/bandicam-2025-04-26-11-25-05-660.gif) (https://imgbb.com/)
I could take them to this and when you want to make a better skin, but if not, I still ask your permission to recolor your base that you made for Theo.
https://www.mediafire.com/file/v0042x4a5b1xn7a/MMPR_Casey_JF.rar/file

I can add them to my list :thumbup:

I made the red one, I'm going to try to do some of them per day since it seems to work well so far
https://www.mediafire.com/file/e50ahu8aqx10a1r/MMPR+Casey+JF+2.rar/file
(https://i.ibb.co/KpS9LnZ7/bandicam-2025-04-26-11-45-03-150.gif) (https://imgbb.com/)
I made two versions of the helmets for the red one and assembled them. I think one of them wears the white suit on the action figures.

Here I put some ranger heads on the base body used for Theo, along with the Dean skin I made for Theo in a variety of colors:
The first ranger was a mistake. I don't know which one it is. I thought it was the Jungle Fury white ranger, but I couldn't find the right one.
Then I made the Titanium ranger, improved to the level I could quickly make.
Next up are the JF Robert (violet).
JF Master Swoop (bat ranger) (he has perforations on his front, so I painted the front head black to hide those details).
JF Lily (yellow ranger) could perhaps be fitted with his head on a female body, but the main problem would be adapting the skin.
Then there's Koda (Dino Charge Cyan), because I also made a mistake when processing it, and they both ended up with similar colors. I took the opportunity to mount it on a body and didn't dedicate myself to making any skin, mainly because I'm not familiar with it. But I'm sharing it here in case anyone wants to perfect it or do it.
JF Finn (Shark Ranger)
JF Dominic (Rhino Ranger)
and the two previous uploads from JF de Casey
(https://i.ibb.co/6fhJkXW/rangers-heads.png) (https://ibb.co/gB1Fx4R)
https://www.mediafire.com/file/co0ji5f4twys1b6/RANGERS+HEADS.rar/file

Fantastic. I'm already doing a couple.

Great news Dean.

I've been trying to capture the corresponding weapons, but I can't quite capture them in either photo or video. What I'm doing is trying to replicate the weapons that come with the action figures, which are more simplified versions. And then, based on what I get in each case, I'll replace Theo's weapon with the corresponding weapon.

I generally try to keep the characters I have action figures. In this case, I only have Theo, Master Swoop, and Titanium. I tried to make the others to expand the range of options a bit.
Ivan Ozze's body is giving me more trouble than my patience can handle.

If anyone wants a Power Ranger character helmet, now's the time to request it.
(I'm pretty good at searching for it in 3/4 for successful results.)

Updating some files and new ones in progress. I'm just uploading them so I don't lose them. They're not finished.
https://www.mediafire.com/file/bv1kvlq96lj2r83/RANGERS+HEADS2.rar/file
(https://i.ibb.co/jxPwQzF/REDO.png) (https://ibb.co/0WR96K3)
working in Cody
(https://i.ibb.co/7JTC8vwS/cody.png) (https://ibb.co/5Wz4tTN1)

Looking good.
If you could do the death rangers helmet I'd like to skin him :D

I'm going to do the Death Ranger then, if you want any more Dean write them here :thumbup:
https://www.mediafire.com/file/hy1whkz5yz7eylh/MMPR+Death.rar/file
see if you like it that way, you could put a ball or counter part on the back of the helmet because I process it half high.

3 RANGERS WITH THE CORRECT WEAPONS
(https://i.ibb.co/bj4nY5sQ/Bat-Ranger.gif) (https://imgbb.com/)
https://www.mediafire.com/file/g7fm5t8tw3tv6oq/MMPR+Master+Swoop+JF.rar/file
(https://i.ibb.co/nqbK87Qq/red-ranger-JF.gif) (https://imgbb.com/)
https://www.mediafire.com/file/e50ahu8aqx10a1r/MMPR+Casey+JF+2.rar/file
(https://i.ibb.co/dsW3LVDp/death-ranger.gif) (https://imgbb.com/)
https://www.mediafire.com/file/hy1whkz5yz7eylh/MMPR+Death.rar/file

A NEW IRONMAN HELMET WIDER
(https://i.ibb.co/twJBzjTc/ironman-helmet.gif) (https://imgbb.com/)

AND PROGRESS IN CODY
(https://i.ibb.co/R4P8N7Tm/cody.png) (https://imgbb.com/)

I didn't know how to solve better nunchakus for the red ranger

Brilliant thank you, dont worry about the nunchucks as i already have that covered.

When it comes to the weapons the figures have, it gets really complex, even with the exception of the handguns. I watched several videos and captured some weapons from them. I discovered that there are three versions of BatRanger action figures, which are really cool, although they're more based on comics that apparently came out when the figures were released.

I made a double-bladed knife with a bat motif that I thought was cute, and it was the one that came with my figure (I bought it loose, but then I lost it).
(https://i.ibb.co/YF4FxYkB/MS-2.gif) (https://imgbb.com/)
https://www.mediafire.com/file/vlkfpn2dgaoco84/MMPR+Master+Swoop+JF2.rar/file

And the combat staff for the animalized version.
All of this would be combinable with Dean's skin for the bat ranger.
(https://i.ibb.co/YYGgVS7/MS-3.gif) (https://imgbb.com/)
https://www.mediafire.com/file/e4ps7y4jtfb1uuj/MMPR+Master+Swoop+JF3.rar/file

Here's an amazing video showing the animalized version, where the character can be given wings. It would also be interesting to bring to life, although it's notoriously complex.

Cody's head is giving me quite a bit of trouble.
I'm going to start making Cody from scratch again in a few days, using the final head I liked.

I'm currently processing a screenshot of Cindy the Bear that RD mentioned. I hope to hear good news about that soon.

Rhino Ranger Update
(https://i.ibb.co/hQrHnd1/RHINO-RANGER.gif) (https://imgbb.com/)
https://www.mediafire.com/file/cl4vlth9kkdlyjt/MMPR+Dominic+JF.rar/file

5th version of Cindy the bear. I'm quite satisfied.
I don't know what body she could be mounted on.
Here I'm sharing it on fbx, which I know is the format that looks great on RD, and in obj.
(https://i.ibb.co/zyxvyx0/CINDY.gif) (https://imgbb.com/)
cindy.obj
https://www.mediafire.com/file/mr5du24gkuwcbi6/CINDY1.zip/file
cindy.fbx
https://www.mediafire.com/file/bahvd31kih5uk7q/cindy5.zip/file

Quote from: cranlox on April 27, 2025, 05:10:28 PMHere I put some ranger heads on the base body used for Theo, along with the Dean skin I made for Theo in a variety of colors:
The first ranger was a mistake. I don't know which one it is. I thought it was the Jungle Fury white ranger, but I couldn't find the right one.
Then I made the Titanium ranger, improved to the level I could quickly make.
Next up are the JF Robert (violet).
JF Master Swoop (bat ranger) (he has perforations on his front, so I painted the front head black to hide those details).
JF Lily (yellow ranger) could perhaps be fitted with his head on a female body, but the main problem would be adapting the skin.
Then there's Koda (Dino Charge Cyan), because I also made a mistake when processing it, and they both ended up with similar colors. I took the opportunity to mount it on a body and didn't dedicate myself to making any skin, mainly because I'm not familiar with it. But I'm sharing it here in case anyone wants to perfect it or do it.
JF Finn (Shark Ranger)
JF Dominic (Rhino Ranger)
and the two previous uploads from JF de Casey
(https://i.ibb.co/6fhJkXW/rangers-heads.png) (https://ibb.co/gB1Fx4R)
https://www.mediafire.com/file/co0ji5f4twys1b6/RANGERS+HEADS.rar/file

the first in the line in this post is a power ranger girl named Hayley Foster from Ninja Steel,  I found it!

I made a Grey Matter variation with a new Azmuth head. I still haven't found a design I like for a combat outfit for the old man.
Almost 100% Dean's work.
(https://i.ibb.co/TM9BXD3q/AZMUTH-2.png) (https://imgbb.com/)

Good job :thumbup:

ANGELINA LOVE
(https://i.ibb.co/kgppyxFF/bandicam-2025-05-03-05-16-42-488.gif) (https://imgbb.com/)
https://www.mediafire.com/file/drmzxqgd4vtie21/TNA+Angelina+Love.rar/file
CODY RHODES
(https://i.ibb.co/MxKH65QZ/bandicam-2025-05-03-06-58-56-785.gif) (https://imgbb.com/)
https://www.mediafire.com/file/ik20gtj41s7kt3x/WWE+Cody+Rhodes+ActionSuit.rar/file

I'm going to go for them(wild force). I was making the Red Ranger from Mighty Morphing Alien Rangers and his weapons, but I overdid it with those weapons.
I attached the sword and the helmet attached to the neck without any problem and with a nice finish, but I couldn't get the fist glove and pistol to fit. I saw that you have some previous Rangers with a holster and pistol. I'll upload it separately if you want to learn how to assemble it and want to do it.
(https://i.ibb.co/qFBhks0s/bandicam-2025-05-03-13-19-38-652.gif) (https://imgbb.com/)
https://www.mediafire.com/file/ow65n9p0tpuijqa/MMPR+Alien+Red+Ranger.rar/file

red ranger alien fist
(https://i.ibb.co/Df3xpFbS/red-ranger-alien-fist.png)
https://www.mediafire.com/file/q3immv4rit6yfny/red_ranger_fist_0503161054_texture_obj.rar/file

blaster gun
(https://i.ibb.co/k64sTsRw/red-pistol.png)
https://www.mediafire.com/file/9az10vh4tuwieus/Blaster_Design_1_0503164556_texture_obj.zip/file

And a first WF character progress
(https://i.ibb.co/23qZYK7r/bandicam-2025-05-03-13-51-38-802.gif)
https://www.mediafire.com/file/9l4uhop62aw7rdo/MMPR+White+Ranger+WF.rar/file

Looking good  :thumbup:

BLACK RANGER WILD FORCE WITH HIS AXE
(obviously without the body skin)
(https://i.ibb.co/p6ysrcv6/bandicam-2025-05-04-02-31-58-692.gif)
https://www.mediafire.com/file/y5s2jtdx0fygr2r/MMPR+Black+Ranger+WF.rar/file

2 MORE

(https://i.ibb.co/N22TvL5Y/BLUE.gif)
https://www.mediafire.com/file/v0gt6esp45rok8h/MMPR+Blue+Ranger+WF.rar/file

(https://i.ibb.co/G4rHBkD4/LUNAR.gif)
https://www.mediafire.com/file/3faelpyi7tz8tzo/MMPR+Lunar+Wolf+Ranger+WF.rar/file

Fantastic :thumbup:

I find this Red Ranger's weapons quite difficult, as I still have his Lion Zord in an action figure.
Here, I added a version of the wings (captured version) from his second animal and added the bow and arrow separately as an item. If you manage to animate him to use a bow and arrow, I'll upload it attached.
(https://i.ibb.co/W4TYZ6zM/red01.gif)
https://www.mediafire.com/file/fw7s2yxj4rug3cj/MMPR+Red+Ranger+WF.rar/file
and other version with wings
(https://i.ibb.co/DgGYqW4H/red02.gif)
https://www.mediafire.com/file/djjjqpp2896y1ws/MMPR+Red+Ranger+WF+3.rar/file

weapon upgrade
(https://i.ibb.co/3Yy66VxJ/with-Baton.gif)
https://www.mediafire.com/file/9l4uhop62aw7rdo/MMPR+White+Ranger+WF.rar/file

I made my own intermediate version, between the DC Timberwolf comic and the Legion of Superheroes cartoon.
(https://i.ibb.co/PvB8VsGb/DC-Timberwolf.gif)

Nice. I'm getting through the rangers quite nicely. Doing some research I found super megaforce. They looked like pirate power rangers and I've done most of the skins. Could you add the helmets to your list please. Thank you.

Of course, Super Mega Force helmets and weapons are on the way!
I accidentally made a Wild Force villain mask while capturing it. I'll probably upload it today for you to see.
I'm having trouble capturing the yellow Wild Force. I don't know why, but I guess it's because of the light glare.

I've been trying to capture the Mega Force Red Ranger helmet. There are three versions. One without glass, which turned out nicely, could be used to represent the face of the person inside. The second is the second Mega Force Red Ranger helmet, and the third is the classic version, which I liked came out a bit oval. I'll probably try a new capture of this last one.
Here's a link to all these versions so you can see them and choose if you want to use any of them. The second one turned out great in my opinion, and I bet the third one could turn out even better.

https://www.mediafire.com/file/azf8oyd114w54eu/MMPRMFREDX3.rar/file

and 1 update Red Ranger super megaforce with dragon sword
(https://i.ibb.co/b52832C1/red-Ranger.gif)
https://www.mediafire.com/file/6hw139vi0yzet1t/MMPR+MF+RED4.rar/file
Maybe it would be interesting to add a swordsman keyframe. It still looks pretty decent.

and Jaguar Ranger with weapons
(https://i.ibb.co/8DPNkDS2/ranger.gif)
https://www.mediafire.com/file/8h6ugel8is9kpk4/MMPR+JaguarRanger.rar/file

(https://i.ibb.co/KzVv6bLd/jindrax.gif)
https://www.mediafire.com/file/w8baok7ukn22m1i/IRRA+Clint-jindrax_mask.rar/file
I thought Clint's animation could be consistent with Jindax so I put the mask on him

Really great stuff. I'm getting through them. I'll get them to you soon.  :thumbup:

Work calmly. I'm taking advantage of the time I have to be home waiting.

RED RANGER DINO CHARGE
(https://i.ibb.co/20FqMv2J/dino-charge.gif)
https://www.mediafire.com/file/64eurbxe8hldk86/MMPR+Dino+Charge+Dean.rar/file

MMPR SMF -BLUE RANGER UNMASKED and with helmet
(https://i.ibb.co/Ps0bC1Cc/ffvt3r-2025-05-16-02-38-04-443.gif)
https://www.mediafire.com/file/y7qyk0vsnz6m7t6/MMPR+Super+Megaforce+Blue.rar/file
https://www.mediafire.com/file/tx00a5mvi2maemv/MMPR+Super+Megaforce+Blue+U.rar/file

SUPER MEGAFORCE GREEN RANGER
(https://i.ibb.co/gMd6j9qZ/bandicam-2025-05-16-04-25-16-457.gif)
https://www.mediafire.com/file/pxdpv628xhucx2n/MMPR+Super+Megaforce+Green.rar/file

METHAL ELEPHANT RANGER ORIGINAL
(https://i.ibb.co/CpL7ZWp8/bandicam-2025-05-16-04-15-16-327.gif)
https://www.mediafire.com/file/yadja9ib4xn6rqv/MMPR+METHAL+ELEPHANT+RANGER.rar/file

MMPR Ninja Steel Yellow Ranger
(https://i.ibb.co/kg8WBw1w/bandicam-2025-05-16-03-13-16-457.gif)
https://www.mediafire.com/file/gld2w7bu9ruwqas/MMPR_Ninja_Steel_Yellow_Ranger.rar/file

CHIP YELLOW RANGER - MODE ZORD MYSTIC FORCE ACTION FIGURE
(https://i.ibb.co/svSMxPjt/FALCON.gif)
https://www.mediafire.com/file/shhcfy4t46z1q5x/MMPR_Chip_Yellow_Ranger_MZ.rar/file

 :thumbup:  :thumbup:  Great stuff, im going to be busy.

one that gave a lot of extra work
(https://i.ibb.co/MxhZcQQz/doggie.gif)
https://www.mediafire.com/file/y3udzwf83dndonq/MMPR+Doggie+Cruger.rar/file

the pink girl
(https://i.ibb.co/6RNZshnq/pink.gif)
https://www.mediafire.com/file/dtanuptfny0vh9p/MMPR+Super+MegaForce+Pink.rar/file

SUPER MEGAFORCE SILVER RANGER
(https://i.ibb.co/fYN0R8mz/bandicam-2025-05-19-13-33-50-305.gif)
https://www.mediafire.com/file/hihm69ourgdpjwk/MMPR+Super+Megaforce+Silver.rar/file

Great stuff :thumbup:
Im getting through them.
Done a lot of work on the ninja steel team, including the gold ranger.

Since you worked on the Ninja Steel Gold Ranger, and I was about to make a helmet, I decided to make the one I was developing!
The screenshot, to my liking, came out with different details. I made it eight times. The first one has a flatter shape and fills in the star; the second one has perforated points. I'll try to create a third version with a screenshot from an animated photo.

(https://i.ibb.co/9msZxLGd/gold-1.gif)
https://www.mediafire.com/file/4gptudn45w591yg/MMPR+Ninja+Steel+Gold+Ranger.rar/file
(https://i.ibb.co/Rkb2qcNX/gold-2.gif)
https://www.mediafire.com/file/srgpk2mgiuozh8h/MMPR+Ninja+Steel+Gold+Ranger+II.rar/file

the third version
(https://i.ibb.co/ZzgW8wGW/3.gif)
https://www.mediafire.com/file/nn5cgzp9yyuypkk/MMPR+Ninja+Steel+Gold+Ranger+3.rar/file

Here's the team blue! I'll probably be unavailable to use my desktop computer until Saturday, so I'll continue from then on. Any suggestions, requests, or feedback can be sent to me via the forum or thread.
 :thumbup:
(https://i.ibb.co/8nGH2mdr/bandicam-2025-05-20-18-12-34-854.gif)
https://www.mediafire.com/file/dxqjkcjons909dr/MMPR+Ninja+Steel+Blue+Ranger.rar/file
and he has other colours helmet
https://www.mediafire.com/file/x9762x7l6ytk1xn/MMPR+Ninja+Steel+Green+Ranger.rar/file
https://www.mediafire.com/file/3ghry0fhsru0s2z/MMPR+Ninja+Steel+BlueDesign++in+red.rar/file

 :thumbup: Thank you.

(https://i.ibb.co/G4CpjTNW/RANGERS-2.png)
https://www.mediafire.com/file/5f84xupotdkmzfm/MMPR+Mystic+Force+Pink.rar/file
https://www.mediafire.com/file/d71zb46z5u3541l/RED+RANGER+SPD.rar/file

A EDIT WITH BOW AND ARROW WF RED RANGER
(https://i.ibb.co/21DbRcLm/ARROW-RED.gif)
https://www.mediafire.com/file/o0qyuw7vkoshsoh/MMPR+WF+Red+Ranger.rar/file

A LITTLE CORRECTION WITH THE HEADS
(https://i.ibb.co/whFkzZL0/2WF.png)
https://www.mediafire.com/file/4r6rom0owixnsgr/MMPR+WF+Lunar+Wolf+Ranger.rar/file
https://www.mediafire.com/file/v88hoa5zv0jin5f/MMPR+WF+Blue+Ranger+Dean.rar/file

:doh:
I forgot to put the power coin on his belt!

(https://i.ibb.co/Vc2bZNsV/WF.png)
I'm really hating the Yellow Ranger Wild Force. I've taken a lot of captured and I'm never happy with how it turns out. The brightness of the yellow color is problematic. As soon as I have decent options, I'll upload them to complete this formation. It turned out really well. Great work, Dean!

And one day he was lucky enough to find a helmet just like his that didn't crush his face...and he ended up with the FreedomForcevs3R.

(Great work by Dean on the body and skin, and my helmet using Sintetic)
(https://i.ibb.co/ccQKKhfd/DG2.gif)
https://www.mediafire.com/file/5t1xyltbmd785wb/MMPR+Spd+Doggie+Cruger+II.rar/file

and 2 versions of blue and green from the spd collection all Dean's work on body skins, an only the helmets mine.
(https://i.ibb.co/KptN3D2Y/bluespd.png)
https://www.mediafire.com/file/ju95a88siyc2wa9/SPD+B&g.rar/file

 :thumbup:
A WF YELLOW HELMET....
the best I could get
(https://i.ibb.co/8nzggncX/YELLOW11.png)
https://www.mediafire.com/file/yw98ozatz6im450/MMPR+WF+Yellow+Ranger.rar/file

Cool stuff :thumbup:

I don't know how you capture all these, but great job!

Quote from: WyldFyre on May 27, 2025, 10:16:37 AMI don't know how you capture all these, but great job!

thanks

Quote from: deanjo2000 on May 27, 2025, 07:51:55 AMCool stuff :thumbup:

All your work completing such perfect skins makes me want to make more helmets thanks to you!

testing in action :thumbup:  :thumbup:  :thumbup:  :thumbup:

(https://i.ibb.co/DDfWZyBh/RED1.gif)
https://www.mediafire.com/file/laew5pzefayommo/MMPR+Hyper+Force+Red.rar/file

(https://i.ibb.co/j9dSqdKN/yellow.gif)
https://www.mediafire.com/file/heg4v05ru9zftax/MMPR_Hyper_Force_Yellow.rar/file

(https://i.ibb.co/zh2JqJjX/blue.gif)
https://www.mediafire.com/file/io3w0z4dcy6wlli/MMPR+Hyper+Force+Blue.rar/file

Great stuff :thumbup:
I think you posted the blue twice and not the yellow.

 :blink:  :wacko: yes Dean, I_´m stupid!
https://www.mediafire.com/file/heg4v05ru9zftax/MMPR_Hyper_Force_Yellow.rar/file

We all have those moments :lol:

I've tried a lot with the Dino Charge Red Ranger helmet, and the results have been less than satisfactory.
Among the most acceptable options are these two; the one with the spikes on top is my favorite of what I've found so far.
The issue with screenshots with yellow parts often causes AI to misinterpret the image, confusing and distorting it.
That's why I generally have to take screenshots of the yellow rangers several times in the hope that it will work.
In this case, the yellow teeth are a problem, since they create a glow that doesn't quite interpret it.
I'm uploading what I have so far of this ranger, and I expect I'll continue with the others and then return to this one

RED RANGER DINO CHARGE OPTIONS TODAY
(https://i.ibb.co/cXpqw5WX/RED36.gif)
https://www.mediafire.com/file/6ewzp92ams91a5n/MMPR+Dino+Charge+Red.rar/file
https://www.mediafire.com/file/7okv1maxcvh54b5/MMPR+Dino+Charge+Red+II.rar/file

HYPERFORCE RANGERS WITH YELLOW RANGER UNMASKED OPTIONS
(https://i.ibb.co/zh50PCvg/HYPERF.gif)
https://www.mediafire.com/file/io3w0z4dcy6wlli/MMPR_Hyper_Force_Blue.rar/file
https://www.mediafire.com/file/laew5pzefayommo/MMPR_Hyper_Force_Red.rar/file
https://www.mediafire.com/file/1cazrq8lt9qpsfl/MMPR_Hyper_Force_Yellow_U.rar/file
https://www.mediafire.com/file/hhcgxu7lb8hpt0y/MMPR+Hyper+Force+Yellow+U+2.rar/file

Very cool. I'll have a play with them tomorrow. Plus I've fixed the buckle so it moves correctly.

I was giving the gloves to the Jaguar Ranger action figure.
They shoot a climber and are used to hit, or at least that's what the figure seems to be. I didn't find anything new about this one online or about the animalized Bat Ranger, but I think they're beautiful figures.
(https://i.ibb.co/xKTX6ybQ/guantes.png)
https://www.mediafire.com/file/mhwuq2ps2t4tuyi/MMPR+JaguarRangerGloves.rar/file

and a first work in blue solar ranger, I think this group is the most impossible to make due to the irregularity of the design of its right and left side helmets
(https://i.ibb.co/4Zrd3cdQ/solar1.png)
https://www.mediafire.com/file/33tfas98n240sk9/MMPR+Solar+Blue+Ranger+II.rar/file

BLACK RANGER DINO FURY
(https://i.ibb.co/sdxJr2sF/black-dino-fury.gif)
https://www.mediafire.com/file/6el8zegvrjmz29j/MMPR+Dino+Fury+Black.rar/file

UNMASKED BLACK RANGER DINO FURY JAVIER GARCIA
(https://i.ibb.co/BVwjk8WW/JAVI.gif)
https://www.mediafire.com/file/247whr0ugr9jg8r/MMPR+Dino+Fury+Black+U.rar/file

BLUE RANGER DINO FURY
(https://i.ibb.co/NnV3tskB/BLUE1.gif)
https://www.mediafire.com/file/078lyfb40sme72a/MMPR+Dino+Fury+Blue.rar/file

BLUE RANGER DINO FURY UNMASKED OLLIE AKANA
(https://i.ibb.co/v4yQKWJ0/B2.gif)
https://www.mediafire.com/file/6vzvjvzexeslx7d/MMPR+Dino+Fury+Blue+U.rar/file

GOLD RANGER DINO FURY
(https://i.ibb.co/d0LM9Wyw/GOLD.gif)
https://www.mediafire.com/file/9h4ivbqjfrj9j39/MMPR+Dino+Fury+Gold.rar/file

GREEN RANGER DINO FURY
(https://i.ibb.co/nqYHprFj/bandicam-2025-06-04-22-33-07-425.gif)
https://www.mediafire.com/file/0ik3wrgg29733nd/MMPR+Dino+Fury+Green.rar/file

After the time-displaced TzekelKan (thanks, Dean) attacked the entire city with his magical powers, a former police officer had to call in a team to stop the chaos.
If that's not enough to defeat him, the rest of the already summoned Power Rangers will have to arrive!
(https://i.ibb.co/G3dZzn6b/Mahoney.gif)
https://www.mediafire.com/file/gvvcz2v8mtqy8bb/Carey+Mahoney.rar/file

WHOA, all looking incredible!!!

First version of Crystal Kane
(https://i.ibb.co/Ldx97g0B/GUARDAR1.png)
https://www.mediafire.com/file/kmruw717v0m2hlg/CRTN+Crystal+Kane.rar/file

second option
https://www.mediafire.com/file/ra4644l0u74g50z/CRTN+Crystal+Kane+2.rar/file

Master Swoop Animalized suit with weapon
(https://i.ibb.co/6RdtKh1P/swoop.png)
https://www.mediafire.com/file/cvc1zeqx1eon762/MMPR+Master+Swoop+Animalized.rar/file

funny moment :doh:
https://www.mediafire.com/file/4vt7w2gzvjnbg4b/MMPR+PIGRANGER.rar/file

Cool stuff. Love the pig ranger :D

Dean's spectacular work on texture and skins made me want to do everything I could to improve it. I think it turned out nice.
(https://i.ibb.co/7dBR0crH/bandicam-2025-06-18-22-05-23-140.gif)
https://www.mediafire.com/file/gcllv22kiaszb88/MMPR+Dino+Thunder+White.rar/file

UPDATE
(https://i.ibb.co/8D54Y8Ys/BLUE1.png)
https://www.mediafire.com/file/io3w0z4dcy6wlli/MMPR+Hyper+Force+Blue.rar/file

update
(https://i.ibb.co/27MbrGq4/bt1.png)
https://www.mediafire.com/file/lyc4ekeowb88m1t/MMPR+Dino+Thunder+Blue.rar/file

 :thumbup:  :thumbup: 

A NEW FX FOR CENTURION ACE (CREATED BY DEAN) HERE THE VIDEO

DINO FURY FINAL PACK 01
(https://i.ibb.co/3m9Hy6rk/2f.png)
https://www.mediafire.com/file/id67wwjpk6q8jjb/DINO+FURY+PACK+01.rar/file

Wow, guys, y'all have created a ton of cool stuff!  That Dino Fury pack looks great, and I love all the custom weapons!

Man, Ace looks great in action; the new FX look great!

ninja steel blue
https://www.mediafire.com/file/dxqjkcjons909dr/MMPR+Ninja+Steel+Blue+Ranger.rar/file
(https://i.ibb.co/vxVbwPQ0/blue.png)

ninja steel yellow
https://www.mediafire.com/file/gld2w7bu9ruwqas/MMPR+Ninja+Steel+Yellow+Ranger.rar/file
(https://i.ibb.co/Fb25bTLk/yellow.png)

ninja steel gold
https://www.mediafire.com/file/4gptudn45w591yg/MMPR+Ninja+Steel+Gold+Ranger.rar/file
(https://i.ibb.co/hFWtz6Vv/gold.png)

ninja steel red ranger
https://www.mediafire.com/file/vitsdn81nbsouja/MMPR+Ninja+Steel+Red+Ranger.rar/file
(https://i.ibb.co/Jw4XGzkq/red.png)

I change the keyframes for the ninja girls and be fine.
(https://i.ibb.co/zWx5d999/girls.png)
https://www.mediafire.com/file/ylrtvgis8kevo4i/MMPR+Ninja+Suits+-+Pink.rar/file
https://www.mediafire.com/file/sv956ruj47syung/MMPR+Ninja+Suits+-+Yellow.rar/file

All of this is possible thanks to Dean's genuinely great work and a little bit of my time.